[Re-authenticate]
[Force Reinitialize]
[Re-authenticate All]
[Force Reinitialize All]
[Parameters]
[Apply]
[Refresh]
4.9.1 802.1X Re-authentication Parameters
Configuration
Reauthentication Enabled
Reauthentication Period
EAP timeout
[Apply]
[Refresh]
Click to perform a manual authentication for the port
Click to perform an 802.1x initialization for the port
Click to perform manual authentication for all ports
Click to perform 802.1x initialization for all ports
Click to configure Re-authentication parameters
Click to apply the configuration change
Click to refresh current configuration
Description
Check to enable periodical re-authentication for all ports
The period of time after which the connected radius clients must be
re-authenticated (unit: second), Value: 1- 3600
The period of time the switch waits for a supplicant response to an
EAP request (unit: second), Value: 1 - 255
Click to apply the configuration change
Click to refresh current configuration
-47-