Thermos 461410708 Product Manual page 22

A Note correct position of heat tents directly over burners.
12
B Place grates into firebox.
C Place warming rack in slots on bottom casting.
LP cylinder is sold separately. Use only with an (over-fill protection device) OPD equipped LP cylinder. Fill and leak check before
13
attaching to grill and regulator.
Place LP cylinder into hole in bottom shelf. Tighten thumbscrew to hold LP cylinder securely in place.
See the Use & Care manual to correctly install the LP cylinder, Leak Test and do the Burner Flame Check.
A Slide grease tray into brackets on bottom casting.
14
B Hang grease clip on grease tray and place grease cup into grease clip.
B
22 • 461410708
Warming Rack
Grate
B
Grease Tray
A
Grease Clip
Grease Cup
C
A
CAUTION
!
• Cylinder collar opening must face to front of cart
once cylinder is attached.
• Failure to install cylinder correctly may allow gas
hose to be damaged in operation, resulting in
the risk of fire.
CAUTION
Failure to install the grease tray will cause hot
grease to drip from bottom of grill with risk of
fire or property damage.
Heat Tents