Thermos 461410708 Product Manual page 18

Loosen long wire and place behind front panel. Do not connect at this time.
6
A Hold control panel close to bottom casting. Attach ignitor wire to electronic ignition module.
B Insert regulator into opening in front panel. Make sure regulator and hose are behind the front panel.
C Position valves into burner tubes (see burner-valve view). Rotate control panel up and rest flange over rail.
D Attach control panel to legs with a screw in top hole on each side.
A Shelf slides into rails. Secure with 4 screws.
7
B Fascia tabs must insert into 2 slots in front of shelf, then slide towards leg.
C Fasten fascia with 1 screw into second hole through control panel and leg.
D Hook "S" hooks into holes on right shelf.
C
18 • 461410708
B
D
#10-16 X 1/2"
Self-Tap Screw
Qty: 5
A
B
C
Correctly assembled burner tube and valve.
D
C
#10-16 X 1/2"
Self-Tap Screw
Qty: 2
D