Assembly - Performax 240-3600 Operator's Manual

17 . bevel scale: The easy-to-read scale on
the front of the table saw cabinet shows the
exact blade angle .
18 . blade: For maximum performance, use
of the 10" (25 .4
combination blade provided with this saw
is recommended . The blade is raised and
lowered with the height-adjusting handle .
Bevel angles are locked using the bevel-
locking lever . Additional blade styles of the
same high quality are available for specific
operations, such as ripping .
WARNING:
rated less than the speed of this tool.
Failure to heed this warning could result in
personal injury.
19 . blade guard: Always keep the guard
down over the blade for through-sawing
cuts .
20 . bevel-locking lever: Located under the
worktable surface on the front of the
cabinet, this lever locks the angle setting of
the blade .
21 . Height/bevel-adjusting
Located on the front of the cabinet, this
hand wheel is used to lower and raise the
blade for adjustments or blade replacement .
The hand-wheel also makes adjusting for
bevel angles easy .
22 . Fence-locking lever: The lever on the
front of the rip fence releases the rip fence
or locks it in place .
23 . Miter gauge: This miter gauge aligns the
wood for a crosscut . The easy-to-read
indicator shows the exact angle for a miter
cut, with positive stops at 0˚ and 45˚ .
24 . Miter gauge grooves: The miter gauge
rides in these grooves on either side of the
blade .
25 . Rip fence: A sturdy metal fence that
guides the workpiece, and is secured with
the locking lever .
26 . Scale: Located on the front rail, the
easy-to-read scale
measurements for rip cuts .
Page 9
SAFETy INSTRUCTIONS
cm) carbide-tipped
Do not use blades
hand wheel:
provides precise
27 . Sliding extension table: Located on the
right side of the saw table, this extension
table gives the operator additional support
when cutting wide workpieces .
28 . On/Off switch assembly: This saw has an
easy access switch . To lock the switch in the
OFF position, remove the yellow switch key
from the switch . Place the key in a location
that is inaccessible to children and others
who are not qualified to use the tool .