Removing The Microprocessor Module - Dell Latitude C610 Service Manual

Hide thumbs Also See for Latitude C610:

Table of Contents

Microprocessor Module: Dell Latitude C610/C510 Service Manual

Back to Contents Page

Microprocessor Module

Dell™ Latitude™ C610/C510 Service Manual

Removing the Microprocessor Module

Replacing the Microprocessor Module

Removing the Microprocessor Module

NOTICE:

Disconnect the computer and any attached devices from electrical

outlets, and remove any installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by

touching an unpainted metal surface on the computer.

NOTICE:

Read

following procedure.

Microprocessor Module Removal

NOTICE:

Do not touch the processor die. Press and hold the microprocessor

down on the substrate on which the die is mounted while turning the cam screw

to prevent intermittent contact between the cam screw and microprocessor.

NOTICE:

To avoid damage to the microprocessor, hold the screwdriver so that

it is perpendicular to the microprocessor when turning the cam screw.

file:///F|/Service%20Manuals/Dell/Latitude/c510-610/cpu.htm (1 of 4) [2/28/2004 7:55:51 AM]

"Preparing to Work Inside the

Computer" before performing the

Table of Contents

Latitude c510