Removing The Palm Rest - Dell Latitude C610 Service Manual

Palm Rest: Dell Latitude C610/C510 Service Manual
Back to Contents Page
Palm Rest
Dell™ Latitude™ C610/C510 Service Manual

Removing the Palm Rest

Removing the Palm Rest
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and
remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching
an unpainted metal surface on the computer.
NOTICE: Read
procedure.
1. Remove the hard
2. Remove the keyboard.
NOTICE: You must remove the display assembly before you remove the palm rest; the
display hinges pass through the back of the palm rest.
3. Remove the display assembly
4. Turn the computer over and remove the three M2.5 x 12-mm screws labeled "circle P."
Palm Rest Screw Removal
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/palmrest.htm (1 of 4) [2/28/2004 7:55:50 AM]
"Preparing to Work Inside the
drive.
and
Computer" before performing the following
hinge covers.