Palm Rest Removal - Dell Latitude C610 Service Manual

Palm Rest: Dell Latitude C610/C510 Service Manual
1 M2.5 x 12-mm screws (3)
2 M2 x 3-mm screws (2)
3 hard-drive bay door
5. Remove the two M2 x 3-mm screws that are located in the hard-drive bay door labeled
"circle P."
6. Turn the computer over, and remove the three M2 x 3-mm screws that secure the palm
rest to the bottom case.
a. Remove the two M2 x 3-mm screws that are located on the back edge of the
bottom case, underneath the display assembly.
b. Remove the M2 x 3-mm screw located underneath the keyboard, on the right side
of the bottom case, next to the microprocessor thermal cooling assembly.
7. Pull up on the pull tab that is attached to the palm-rest flex cable connector to remove it
from the interface connector on the system board.

Palm Rest Removal

file:///F|/Service%20Manuals/Dell/Latitude/c510-610/palmrest.htm (2 of 4) [2/28/2004 7:55:50 AM]