NordicTrack C1250 User Manual page 13

15. IMPORTANT: See page 15 and plug in the
power cord. Next, see page 17 and turn on
the power.
See page 27; follow steps 1 through 3 to cal-
ibrate the incline of the treadmill.
When the frame stops moving, remove the
key from the console and unplug the power
cord.
16. Raise the Frame (56) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (53) so that the large
barrel and the latch knob are oriented as shown.
Attach the lower end of the Storage Latch (53) to
the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (12).
Attach the upper end of the Storage Latch (53)
to the bracket on the Frame (56) with a 3/8" x
1 3/4" Bolt (6) and a 3/8" Nut (12). Note: It may
be necessary to move the Frame (56) back and
forth to align the Storage Latch with the Frame.
15
16
56
12
Latch
Knob
Large
Barrel
94
13
IMPORTANT:
Make sure to follow all
instructions in this step.
6
53
12
3