Windows Vista; Window Vista - D-Link DCM-604 User Manual

DCM-604 Cable Modem EMTA Gateway
4.3

Windows Vista

1.
Connect USB cable from PC to cable modem.
2.
Connect RF cable and power on Cable Modem. Wait until it register, it will
take about 40 seconds to 4 minutes depends on network traffic. Cable
Modem may reboot if you previously connect it through Ethernet port.
3.
Windows will prompt new hardware found, insert the Driver CD into your
CD-ROM drive.
4.
Click "Locate and install driver software (recommended)" item
5.
Insert the Driver disk that came with your cable modem into your CD-
ROM drive. Windows Vista will automatically searched and found this
driver.
9
User's Manual