Control Panel Buttons - Soleus Air iCongo PSQ-08-01 Operating Instructions Manual

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
CONTROL PANEL
Air Conditioner
Mode
Indicator
Bucket Full
Indicator
Fan
Mode
Indicator
Dehumidifier
Mode
Indicator
Mode Selection
Button
OPERATING INSTRUCTIONS

CONTROL PANEL BUTTONS

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER but-
ton once more to turn the unit off.
2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Air
Conditioner mode, Dehumidifier (Dry) mode, and Fan only mode. Each press of the MODE button will
light up a different icon on the control panel. The exhaust hose and window kit must be installed when
the unit is in Air Conditioner, and Dehumidifier mode. When using the unit as a fan, it is not necessary
to keep the exhaust hose and window kit connected to the unit.
3) Temperature - Select the desired temperature by pressing either ▲ or ▼ key when using the unit in
Air Conditioner mode. The temperature indicator flashes to display the desired temperature setting. Af-
ter the desired temperature is set, the temperature indicator will flash 10 seconds before it returns to
current room temperature. The temperature indicator display shows temperature in Fahrenheit.
4) Bucket Full - When the unit cannot evaporate the collected moisture fast enough, the excess water will
collect in a backup water tank located inside the unit. Once the tank is full, Bucket Full indicator will light
up.
5) Louver Direction
air up and down.
6) TIMER - Press the TIMER button to turn the unit auto-on or auto-off. Set the timer by pressing either ▲
or▼ button.
Increase
Temperature/Timer
Button
BUCKET FULL COOL
FAN
DRY
MODE
Decrease
Temperature/Timer
Button
- This unit has -way directional louvers. Use the louver guides manually to direct
Signal Receiver
HIGH
TEMPERATURE
MEDIUM
LOW
SPEED
POWER
POWER
ON/OFF
Button
Fan Speed
Indicators
Timer
TIMER
Button
Fan Speed
Button