Control Panel Buttons - Soleus Air KY-120HP Operating Instructions Manual

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
CONTROL PANEL
OPERATING INSTRUCTIONS

CONTROL PANEL BUTTONS

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER
button once more to turn the unit off.
2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Air
Conditioner mode, Dehumidifier mode, Heat mode, Fan only mode, and Auto mode. Each press of the
MODE button will light up a different icon on the control panel. The exhaust hose and window kit must
be in- stalled when the unit is in Air Conditioner, Heat mode, Dehumidifier mode, and Auto mode. When
using the unit as a fan, it is not necessary to keep the exhaust hose and window kit connected to the unit.
Temperature - Select the desired temperature by pressing either ▲ or ▼ key when using the unit in
3)
Air Conditioner mode. The temperature indicator flashes to display the desired temperature setting.
After the temperature is set; the unit will display this temperature setting until it is changed by the user.
The temperature indicator display shows temperature in Fahrenheit. Under stand-by condition, press and
hold the ▲ and ▼ key to switch between Celsius and Fahrenheit.
4) Timer - Press the TIMER button to set the unit automatically turn On or Off. Press the TIMER button
repeatedly to set timer within 1-24 hours. Once the desire time is displayed, wait for 5 seconds and the
timer will be active. Press the TIMER button or POWER button to cancel the timer.
5) Bucket Full - When the unit cannot evaporate the collected moisture fast enough, the excess water
will collect in a backup water tank located inside the unit. The control panel will display "
Tank) if this occurs.
6) Louver Direction - This unit has 2-way directional louvers and will swing up and down automatically
when the unit is power on.
10
" (Full