Table of Contents
Advertisement
Adjust Menu (3 of 3)
Item Field
ADJUST
ADJUST
ADJUST
ADJUST
ADJUST
After the last item, the control returns to the first item in the menu.
© 2011
D 403 - 07/11
Range
Access
40 to 100°F
(4.5 to 38.0°C)
Installer
Default = 70°F
User
(21.0°C)
40 to 100°F
(4.5 to 38.0°C)
Installer
Default = 60°F
(15.5°C)
Off, 1, 2, 3, 4, 5
Installer
Default = 2
100 to 200°F
(38.0 to 93.5°C)
Installer
Default = 180°F
(82°C)
70 to 180°F
(21.0 to 82.0°C)
Installer
Default = 125°F
(51.5°C)
Off or On
Installer
Default = On
60 to 200°F
(15.5 to 93.5°C)
Installer
Default = 180°F
(82.0°C)
°F or °C
Installer
Default = °F
User
Description
WWSD OCCUPIED
The system's Warm Weather Shut Down temperature
during Occupied periods or when a schedule is not
used.
WWSD UNOCCUPIED
The system's Warm Weather Shut Down temperature
during Unoccupied periods.
Note: Item is only available when a schedule or User
Switch is present on the system.
DHW MODE
Selects the DHW mode of operation. The
mode determines the zone and boiler system
pumps operation whenever the DHW pump is in
operation.
DHW EXCHANGE
Selects the minimum boiler target to the DHW heat
exchanger.
Note: Item is only available when DHW Mode is set
to 1 through 4 when a DHW sensor is not connected.
It is available in DHW Mode 5 when a DHW sensor
is connected.
DHW OCCUPIED
Selects the temperature of the indirect DHW tank.
Note: Item is only available when an optional DHW
sensor is installed and the DHW Mode is set to 1
to 4.
DHW UNOCCUPIED
Selects whether or not the indirect DHW tank should
be heated to during Unoccupied time periods.
Note: Item is only available when Schedule #1
is available or a User Switch is present on the
system.
SETPOINT
The minimum boiler target temperature when a
Setpoint Call is present.
UNITS
Selects units for temperature display.
18 of 32
Set to
SECTION I
SECTION I
SECTION D
SECTION D
SECTION D
SECTION I
SECTION E
Advertisement
Table of Contents
