Operation - Husqvarna CT20 Instruction Book

Safety, assembly, operation, and maintenance
Hide thumbs Also See for CT20:
Table of Contents

Advertisement

KNOW YOUR CULTIVATOR
READ THE OWNER'S MANUAL AND ALL SAFETY RULES BEFORE YOU OPERATE the
cultivator. To familiarize yourself with the location of the controls, compare the illustrations with
your cultivator. Save this manual for future reference.
Throttle Control
Lever
Upper Handle
Depth Stake and
Transport Wheels
Assembly
Throttle Control −
speed and the tine rotation. The cultivator is
equipped with a centrifugal clutch that en-
gages the tine drive system when the engine
speed is increased.
Choke Control Lever −
when starting a cold engine.
ON / OFF Switch −
lows the engine to start. The OFF position
stops the engine and keeps the engine from
starting.
EYE PROTECTION
Always wear safety glasses. If you wear eye
glasses, put a Wide Vision Safety Mask over
your eye glasses.
MS−3615MA

OPERATION

Lower Handle
Controls the engine
Use to assist
The ON position al-
ON / OFF
Switch
Compression
Release
Recoil Starter Handle −
equipped with an easy pull recoil starter.
Compression Release −
pull of the recoil starter handle, push the
compression release.
Depth Stake −
to adjust the depth of cut. Also use to help
control the direction and speed of the
cultivator.
Transport Wheels −
wheels down when transporting the cultiva-
tor.
WARNING: Debris thrown from
the cultivator can result in for-
eign objects being thrown into
the eyes, which can cause severe eye
damage. Always wear safety glasses or
eye shields when operating the cultiva-
tor.
12
Recoil Starter Handle
Choke Control
Air Cleaner
Fuel Cap
Tine Shield
Tines
Figure 6
The engine is
Before each
Mount with the wheels up
Mount with the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents