Table of Contents
Advertisement
Chapter 12: MIDI/SYNC Mode, OTHER Mode
MIDI CLOCK
MIDI CLOCK is a general synchronization signal which most sequencers are equipped with.
When MIDI CLOCK is used, the tempo of the MPC2000XL will control another sequencer.
MIDI TIME CODE (MTC)
In contrast to MIDI CLOCK, MIDI TIME CODE is a snchronous signal with absolute time. The
MTC does not have tempo data and therefore it is necessary to set the tempo change on the slave
device and the MPC2000XL.
Frame rate:
Set this to the same frame rate being used by the slave device.
You can also set the start time of the sequence or song when synchronizing with the MTC. Move
the cursor to the Now: field in the Main or Song Screen and press OPEN WINDOW to display the
following window.
Start time:
Frame rate:
Send MMC:
This allows you to send MIDI Machine Control messages.
OFF
The MIDI synchronous signal is ignored when Mode: is set to OFF.
Sync Out
Sync Out
.......................................................
Mode:MIDI CLOCK
MIDI CLOCK
Send MMC:OFF
Send MMC:OFF
Sync Out
Sync Out
.......................................................
Mode:MIDI TIME CODE
MIDI TIME CODE
Frame rate:25
Frame rate:25
Send MMC:OFF
Send MMC:OFF
......................................................................................................
Time Display
Time Display
Display
Display style:
style:BAR,BEAT,CLOCK
Start time:00h00m00s00f00
Start time:00h00m00s00f00
Frame rate:25
Frame rate:25
........................................................................................................
The playback starts when the time code set here is received.
Sets the frame rate of the time code.
Sync Out
Sync Out
.......................................................
Mode:OFF
Send MMC:OFF
Send MMC:OFF
Page 181
(Out:A)
(Out:A)
CLOSE
(Out:B)
Advertisement
Table of Contents
