Converting Mono To Stereo - Akai MPC2000XL Operator's Manual

Converting Mono to Stereo

When a mono sound is selected, the following window will be displayed.
Press NEXT [F5].
L source= field is the name of sound selected. This source will be the left channel of a stereo
sound to be created.
Select the sound for the right channel at R source: field. If the stereo sound is selected here,
only the left channel data of that sound will be used.
Enter the sound name for the stereo converted sound in the New St name: field. The default
sound name will be the L source sound name with suffix S added.
Press DO IT [F5] to execute.
Note: Note:
Note: If the length of the L and R sources are different, the R source will automatically be Note: Note:
adjusted to the same length as that of the L source. That is, if the R source is longer
than the L source, the excess part of the R source sound will be cut off. If the R
source sound is shorter, silence will be added to fill in.
....................................................................................
Convert Sound Convert Sound
Convert:MONO TO STEREO MONO TO STEREO
CANCEL
........................................................................................
....................................................................................
MONO TO STEREO MONO TO STEREO
L source:KICK_OF_1B
...................................................................................
R source:NR_CRS_A
New ST name:KICK_OF_1B____-S New ST name:KICK_OF_1B____-S
CANCEL
........................................................................................
Page 96
Chapter 6: Creating and Editing Sounds
NEXT
DO IT