Table of Contents
Advertisement
Chapter 6: Creating and Editing Sounds
Adjust:
You can use this to 'tweak' the selected preset. If the selected preset gives near
enough a good result, but you feel it may benefit from a little fine tuning, try a few
different settings here until you get the best result.
A positive value will help improve high frequency and percussive sounds while a
negative value will help improve bass sounds.
Most of the time, this can be left at zero.
Press DO IT [F5] to execute timestretch.
BPM Match
This enables you to change the tempo of the sample so that it will fit into the track that you are
working with.
Press BPM [F2] on the Timestrech screen, the B.P.M. Match screen will appear.
Beat:
Set the full beat length of the sample here. For example, if there are 2 bars at 4 beats to a
bar, set this to 8.
Source tempo:
This is set automatically when the beat field is set. If you know the tempo of the sample, you
can enter it here.
New tempo:
Set the new tempo here.
Press DO IT [F5] to execute tempo change.
....................................................................................
B.P.M. Match
Beat:
Source tempo: 24.4
Source tempo: 24.4
New tempo: 24.4
New tempo: 24.4
CLOSE
........................................................................................
Page 107
4
DO IT
Advertisement
Table of Contents
