Fine Adjustment Of The Loop Points - Akai MPC2000XL Operator's Manual

Fine Adjustment of the Loop Points

Select the To: field in the LOOP screen and press OPEN WINDOW to open the Loop To fine
window.
•
To:
This sets the beginning of the loop. Change the value with the DATA wheel. You can enter
large numbers by entering a number with the numeric pad and then pressing ENTER.
•
Lngth:
This sets the length of the loop. Change the value with the DATA wheel. You can enter
large numbers by entering a number with the numeric pad and then pressing ENTER.
•
Loop lngth:
This fixes the point of either the end point or the length of the loop.
VARI When the point where the loop folds is changed, the end point remains
FIX
Select the Lngth:/End: field in the LOOP screen and press OPEN WINDOW to open the
Loop End fine window.
•
End:
This sets the end of the loop. Change the value with the DATA wheel. You can enter large
numbers by entering a number with the numeric pad and then pressing ENTER.
•
Lngth:
This sets the length of the loop. Change the value with the DATA wheel. You can enter
large numbers by entering a number with the numeric pad and then pressing ENTER.
•
Loop lngth:
This fixes the point of either the end point or the length of the loop.
VARI When the end point is changed, the point where the loop folds remains
FIX
You can enlarge or reduce the sample wave display by pressing ZOOM+ [F3] or ZOOM-[F2].
Press ZOOM- [F2] to display the entire wave and set a rough point where the loop folds or the
loop length then press ZOOM+ [F3] several times to make fine adjustments.
When PLAY X [F6] is pressed, you can play back the currently selected sound at full velocity
according to the settings in the PLAY X: field. For details refer to "TRIM Mode" section
......................................................................................................
Loop To fine
ZOOM- ZOOM+
........................................................................................................
fixed and the length of the loop changes.
When the point where the loop folds is changed, the length of the loop
remains fixed and the end point moves.
......................................................................................................
Loop End fine Loop End fine
ZOOM- ZOOM+
........................................................................................................
fixed and the length of the loop changes.
When the end point changed, the length of the loop remains fixed and the
point where the loop folds moves.
Page 102
Chapter 6: Creating and Editing Sounds
To: 401258
Lngth: 39730
Loop Lngth:VARI
PLAY X:ALL
CLOSE PLAY X PLAY X
End: 401258
Lngth: 39730
Loop Lngth:VARI Loop Lngth:VARI
PLAY X:ALL PLAY X:ALL
CLOSE PLAY X