ASCOM Smart Series AH30 Operating Manual page 53

User-Programmable Rates
Programming
A Rate
continued
• Use the alphanumeric keys to enter a rate name, and then press the [ENTER]
key.
For example: [T], [E], [S], [T], [ENTER]
• If the rate is going to be sent to a postage meter, select [Metr] by pressing the
appropriate [F1] through [F4] softkey.
Select [Cont] by pressing the appropriate softkey.
• Select desired precision of the programmed rate, either [1/10] or [Cent] by pressing
the appropriate softkey.
Then, select [Cont] by pressing the appropriate softkey.
• Using the numeric keys, enter the number of zones desired for the programmed
rate and then press the [ENTER] key.
When selecting the desired precision of the programmed rate ([1/10] or [Cent]
remember to consider if your postage meter is a decimal or non-decimal model.
Continued on the next page.
Ascom Hasler Mailing Systems, ® Inc.
Is Rate Meterable
Metr Cont
Select Precision
1/10 Cent
Enter # of Zones
Cont
_ 0
08/99
[1/10] = one tenth of a cent (.001)
[Cent] = one cent (.01)
Minimum amount = 1
Maximum amount = 10
AH30
Page 6-3