Programming A Rate - ASCOM Smart Series AH30 Operating Manual

User-Programmable Rates
Programming
A Rate
To program a rate, do the following:
• Select [SET UP] by pressing the appropriate key.
• Use the [
• Use the [
[Edit]
[Prog]
[Clr]
[Prnt]
Some menu selections may not be available until after at least one rate is programmed.
• Select [Prog] by pressing the appropriate softkey.
C
ontinued on the next page.
Page 6-2
System Setup
Accounting Setup
] to select [Rate Setup], then press the [ENTER] key.
Programmable Rates
Discounts
] to select [Programmable Rates], then press the [ENTER] key.
Make Selection
Edit Prog Clr
Allows the operator to edit a previously programmed rate.
Allows the operator to program a rate.
Allows the operator to clear a previously programmed rate.
Allows the operator to print a previously programmed rate.
Enter Rate Name
_ _ _ _ _ _ _ _
08/99
Prnt
Name can be up to
alphanumeric characters
Ascom Hasler Mailing Systems, ® Inc.
AH30