ASCOM Smart Series AH30 Operating Manual page 101

Security
Setting Up
Password
• Use the [
Security
continued
• Use the alphanumeric keys to enter in the desired 4 character secondary password
and then press the [ENTER] key.
• Use the alphanumeric keys to enter the same password that you entered in the
previous step, then press the [ENTER] key.
Various
features this
password has
access to.
• Use the [
disable the password access.
• When complete, press the [EXIT/PR.MENU] key.
The Secondary Passwords allow access to a selected list of password protected
features. It normally is used as an operator password.
A maximum of ten secondary passwords is allowed.
Ascom Hasler Mailing Systems, ® Inc.
] to select [Secondary Passwords] and press the [ENTER] key.
Secondary Password
Confirm Password
System Setup
I/O Setup
] to select the desired feature and press the [ENTER] key to enable or
_ _ _ _
_ _ _ _
DIS
ENA = enabled or "on"
DIS = disabled or "off"
ENA
Use the [ENTER] key
to toggle between
enable and disable.
08/99
AH30
Page 11-5