Transferring Accounting Data Quick Start - ASCOM Smart Series AH30 Operating Manual

PC Interfacing
PC Setup The following should be done to set up the PC:
Using
Step
Windows
1
Quick
2
Start
3
4
5
6
7
8
9
Transferring
Accounting
Data
Quick Start
Step
1
2
3
4
5
Ascom Hasler Mailing Systems, ® Inc.
Action
Run WINDOWS
Select the PROGRAM MANAGER.
Select TERMINAL.
Select SETTINGS.
Select COMMUNICATIONS.
Select the COM PORT to use.
Select 9600 for BAUD RATE.
Select 8 for DATA BITS.
Select 2 for STOP BITS.
Select NONE for PARITY.
Select OK.
Select SETTINGS.
Select BINARY TRANSFERS.
Select KERMIT.
Select OK.
Action
AH30 Press the [ACCT] key.
AH30
Use the [ ] to select [Access Accounts]
and press the [ENTER] key.
AH30
Use the [ ] to select [Transmit to PC]
and press the [ENTER] key.
PC From the WINDOWS TERMINAL menu
select RECEIVE BINARY FILE
PC Enter a file name ... the transfer is initiated.
Comments
The COM PORT select should be the
same as the one that the cable from the
AH30 is connected to.
Comments
System will ask for a file
name.
08/99
AH30
Page 12-3