Acom 2000R Operating Manual page 13

In this position only the RCU is operational, while the amplifier itself is still turned off. The control of the
amplifier is structured in two menus - OFF and MAIN, each having several sub-menus :
POWER ON
OFF MENU
You can proceed in one of two directions:
a) you can enter the OFF menu (see below) or:
b) you can turn on the amplifier and begin the warm-up sequence. After 2.5 minutes you may start
operating the amplifier or you may enter the MAIN menu (see S.4).
We recommend that for the time being you examine partly the functions of the RCU in the OFF menu
and thus acquaint yourself with the basic ideas. The control and indications via the RCU are analogous
in OFF and MAIN menus.
The OFF-menu (see also section 5) consists of six sub-menus, which can be reached by pressing the
(Enter) button:
12
S.3
S.5
INFO sub-menu S.5-1
HELP sub-menu
S.5-2
CLR sub-menu S.5-3
CALL sub-menu S.5-4
LOCK sub-menu S.5-5
DEF sub-menu
S.5-6
Fig.3-2 Menu Structure (see also S.8)
MAIN MENU
AUTO TUNE sub-menu
MAN. TUNE sub-menu
MEASURE sub-menu
SERVICE sub-menu
Erasing USR segments
S.4
S.4-1
S.4-2
S.4-3
S.4-4
S.4-5