Section G - General Errors - Sharp UP-700 Quick Reference Manual

SECTION G - GENERAL ERRORS

"SYSTEM CLOSED ENTRY INHIBIT"
TURN KEY TO "PGM2" POSITION
TOUCH 6 "OPEN STORE"
TOUCH ENTER KEY
"SERVER NOT ASSIGNED"
TOUCH THE # OF THE TERMINAL
EXAMPLE:
AT REGISTER #2, TOUCH THE 2 KEY
TOUCH SERVER # KEY
"POWER OFF"
CHECK NETWORK HUB/SWITCH (USUALLY LOCATED AT THE PC OR AT
REGISTER 1) HUB/SWITCH SHOULD HAVE:
o ONE LIGHT FOR POWER
o ONE LIGHT FOR EACH REGISTER
o ONE LIGHT FOR PC (IF USING SDW SOFTWARE)
DISCONNECT POWER TO HUB/SWITCH FOR 30 SECONDES
RECONNECT POWER TO HUB/SWITCH
"PAPER EMPTY"
(REGISTER WILL NOT OPERATE WITHOUT PAPER IN BOTH RECEIPT AND JOURNAL)
REPLACE WITH THERMAL 2 ¼" PAPER
TOUCH CL KEY
"HEAD UP"
PUSH GREEN LEVER ON RIGHT SIDE OF PRINTER FORWARD
TOUCH CL KEY