Chapter 1. General - Sharp ER-A520 Installation Manual

CHAPTER 1. GENERAL

This manual describes the ER-A520/A530 disassembly procedures
and the option attachment procedures. For assembly procedures,
reverse the disassembly procedures. For attachment of options which
do not require special descriptions, descriptions are omitted.
Note for operations
• Before operation, ground the operator's body and perform other nec-
essary measure against static electricity.
• During operations, disconnect the AC cord from the outlet.
• After completion of operations, connect the connectors.
• After completion of operations, be sure to perform the master reset.
I OPTIONS
NO CLASSIFICATION
1 Drawer
2 Key kit
3 Display
4 Memory
COMPONENT NAME
Remote drawer
1 x 1 key top kit (30)
1 x 2 key top kit (30)
2 x 2 key top kit (10)
1 x 1 dummy key kit (30)
5 x 1 dummy key kit (10)
Customer Pole Display
RAM board
MODEL NAME
ER-03DW
ER-04DW
ER-11KT7 ER-A520 only
ER-12KT7
ER-22KT7
ER-11DK7G
ER-51DK7G
UP-P16DP
UP-S02MB
ER-A520/A530
– 1 –
REMARK