Vibration Safety - Drill Master 67027 Set Up And Operating Instructions Manual

7. Do not leave the tool unattended
when it is attached to its battery pack.
Turn off the tool, and disconnect it
from its battery pack before leaving.
8. The battery charger gets
hot during use. The
charger's heat can build
up to unsafe levels and
create a fire hazard if it does not
receive adequate ventilation, due to
an electrical fault, or if it is used in a
hot environment.
Do not place the charger on a flam-
mable surface. Do not obstruct any
vents on the charger. especially
avoid placing the charger on car-
pets and rugs; they are not only
flammable, but they also obstruct
vents under the charger.
Place the charger on a stable, solid,
nonflammable surface (such as a
stable metal workbench or concrete
floor) at least 1 foot away from all
flammable objects, such as drapes or
walls. Keep a fire extinguisher and a
smoke detector in the area. Fre-
quently monitor the charger and
battery while charging.
9. This product is not a toy. Keep it out
of reach of children.
10. People with pacemakers should
consult their physician(s) before use.
Electromagnetic fields in close prox-
imity to heart pacemaker could cause
pacemaker interference or pacemak-
er failure. In addition, people with
pacemakers should:
• Avoid operating alone.
• Do not use with Trigger locked on.
• Properly maintain and inspect to
avoid electrical shock.
SKU 67027 For technical questions, please call 1-800-444-3353.
11. WARNING: Some dust created by
power sanding, sawing, grinding, drill-
ing, and other construction activities,
contains chemicals known [to the
State of California] to cause cancer,
birth defects or other reproductive
harm. Some examples of these
chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and ce-
ment or other masonry products
• Arsenic and chromium from chemi-
cally treated lumber
Your risk from these exposures var-
ies, depending on how often you do
this type of work. To reduce your
exposure to these chemicals: work in
a well ventilated area, and work with
approved safety equipment, such as
those dust masks that are specially
designed to filter out microscopic
particles. (California Health & Safety
Code § 25249.5, et seq.)
12. The warnings, precautions, and in-
structions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.

Vibration safety

This tool vibrates during use. Re-
peated or long-term exposure to
vibration may cause temporary or
permanent physical injury, particularly
to the hands, arms and shoulders. To
reduce the risk of vibration-related
injury:
1. Anyone using vibrating tools regu-
larly or for an extended period should
Page 5