Valet Mode; Power Save; Rapid Resume Logic - Auto Mate 4104A Owner's Manual

Valet Mode

You can prevent your system from automatically locking or activating
the optional failsafe starter kill by placing your system in valet mode.
This can be useful when washing your vehicle or having it serviced.
Valet mode can be entered and exited by using the vehicle key and
the control button.
Use the following steps to manually enter and exit Valet Mode:
1. Turn the ignition switch On and then Off
2. Immediately press and release the control button once
3. The control center LED turns On when entering and Off when
exiting.

Power Save

To reduce power consumption the control center status LED modifies
its output if the vehicle is parked for an extended period. If Locked the
flashing is reduced after 24 hours. When Valet mode is On the LED
turns off after 1 hour and resets each time the ignition is turned off.

Rapid Resume Logic

IIf power is ever disconnected by a mechanic or thief, the system will
resume the state it was in at the time of disconnection, when power
is reconnected.
© 2012 Directed. All rights reserved. 17