Configure Vlan Port Settings - ZyXEL Communications GS1920-24 User Manual

Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup (continued)
Table 32
LABEL
Clear
VID
Active
Name
Delete
Cancel
9.5 Configure
Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a port.
Click the VLAN Port Setup link in the VLAN Status screen.
Advanced Application > VLAN > VLAN Configuration > VLAN Port Setup
Figure 71
The following table describes the labels in this screen.
Advanced Application > VLAN > VLAN Configuration > VLAN Port
Table 33
LABEL
GVRP
Port
Chapter 9 VLAN
DESCRIPTION
Click Clear to start configuring the screen again.
This field displays the ID number of the VLAN group. Click the number to edit the VLAN
settings.
This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
This field displays the descriptive name for this VLAN group.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
VLAN Port Settings
DESCRIPTION
GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for
switches to register necessary VLAN members on ports across the network.
Select this check box to permit VLAN groups beyond the local Switch.
This field displays the port number.
GS1920 Series User's Guide
92
Setup