VM9424
OPERATING INSTRUCTIONS
Power On / Off
Press the SRC/
button (10) on the unit (or the
control) to turn the unit on. The buttons on the front of the unit light up.
Press and hold the
Remote Control Functions
Table 1: Common Remote Control Functions
SRC
Select playing source
MUTE
Toggle audio output on/off
Turns the power on/off
POWER/
/
/
/
Menu Navigation
VOL -
Decreases volume
VOL +
Increases volume
PIC
View PICTURE MENU to adjust brightness
MENU
View SOURCE menu
SEL
Access equalizer menu
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be
disabled through the Setup menu.
Mute/Line Mute
Press the VOL/MUTE button (5) on the front panel or the MUTE button (3) on
the remote control to mute the volume from the unit. Press the rotary encoder
button again to restore the volume. Adjusting the volume or using any of the
audio setup features cancels the mute function.
Playing Source Selection
Source Button (SRC)
Press the SRC button on the front panel (10) or remote control (8) to change
between available audio playing sources in the following order: NAVI, RADIO,
DISC, SD, USB, XM, BLUETOOTH, AV2, AV1, CAMERA, REAR.
button to power off the unit.
9
button (4) on the remote