Operating Instructions - Jensen VM9225BT Operating Instructions Manual

VM9225BT

OPERATING INSTRUCTIONS

Power On / Off
Press the /SRC button to turn the unit on. The buttons on the front of the unit
light up and the current mode status appears on the LCD. Press and hold the
button to power off the unit.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be
disabled through the Setup menu.
Mute
Press momentarily to activate the MUTE function. Press again to resume normal
listening. If the MUTE wire is connected, audio output mutes when a phone call is
received by the mobile phone.
Playing Source Selection
Source Menu
Source Menu Page 2
Source Menu Page 1
You can use the touch screen to change the source through the SOURCE MENU.
To access the SOURCE MENU, touch the top left corner of the screen or press the
SRC button. The SOURCE MENU consists of two pages. Touch NEXT or PREVIOUS to
go from one page to another. Touch the DISC, RADIO, USB, USB2, SD, SIRIUS/XM,
BLUETOOTH (BT), NAV, AUXIN, CAMERA or SETTINGS to select the corresponding
source.
NOTE: If an iPod® is attached to the USB port, "iPOD" appears instead of the text
"USB."
13