Operating Procedure; Clean-Up - LELLO 5030 PoIa Instruction And Recipe Manual

Batch ice cream makers
Table of Contents

Advertisement

OPERATING PROCEDURE

Remove the plastic lid and insert the stainless blade into the bowl sliding it over
the center shaft. Once securely in place over the shaft, turn the locking nut
clockwise until tight, replace lid.
Place the appliance near an electrical outlet, plug it in, it is now ready to use.
Note: Model 5030
volt outlet, model 5060
Remove the lid and pour the desired ingredients into the bowl, replace the lid.
Set the timer for about 20 minutes. Note: the freezing time varies depending
on the room temperature and the temperature of the ingredients.
Pre cooling of the ingredients will expedite the freezing time. Now turn both the
Churn and Chill switches on. The machine will continue to run for the time set.
The blade rotates only when the Churn switch is turned on and the timer has
been set.
Turning the Chill switch off 3-4 minutes prior to the actual time set will make
removal of the dessert easier.
Ideally, frozen desserts should be served barely frozen making presentation
simplified. Never let your dessert become icy.
Before removing the lid from the bowl, either to add ingredients or to remove
the finished product, always turn the timer to zero and turn the Churn switch off.
If you are removing the dessert also shut the Chill switch off. Remove the frozen
dessert with the special spatula provided with the machine.
Always unplug the machine when not in use.
IMPORTANT NOTE: If the Chill switch has been turned off, always wait at least
a couple of minutes before turning it back on.
Always unplug the machine before cleaning. The cover, mixing blade and locking
nut are all removable for easy cleaning. Pour l/4 to l/2 cup of hot water into the
empty bowl, wait a few minutes the wipe the bowl with a damp sponge, repeat
process until clean. Finally dry with a clean towel. Model 5060
equipped with a drain incorporated at the bottom of the bowl for easy cleaning.
Consumer service l(201) 939-2555
Service & Warranty l(800) 223-l 898
5040
and 5050 Zara all use the standard 110/120
Ragusa
requires a special 220 volt outlet.

CLEAN-UP

Information
Ragusa
is

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5040 fiume5060 ragusa5050 zara

Table of Contents