Installing The Lionel No. 610-5906-001 Sound Activation Button - Lionel SD60-M Owner's Manual

Installing the Lionel no. 610-5906-001 sound activation button

T
o operate the bell and horn sounds
when operating your SD60-M with
conventional transformers, you'll need to
B
LACK WIRE
For AC transformers lacking a horn/whistle button (two no. 5906s required)
Red wire
Lionel no.
610-5906-001
sound activa-
tion button
(for horn)
The no. 610-5906-001 sound activation button (available separately)
works with any Lionel AC transformer except no. 6-4690 Type MW.
Note!
Transformers made by other manufacturers may not be compatible
with Railsounds.
1 2
C '
USTOMER
TO YOUR TRANSFORMER
Red wire
Lionel no. 610-5906-001
sound activation button
for activating the bell
For AC transformers with a horn/whistle button
1 2
Black wire
install the Lionel no. 610-5906-001 sound
activation button (available separately).
Connect the button(s) as shown below.
S WIRE
ATTACH TO GROUND TERMINAL
ATTACH TO POWER TERMINAL
All track power must
feed through "Sound
Note!
Activation Button"
Do not bypass button
ATTACH TO GROUND TERMINAL
Red wire
TO YOUR TRANSFORMER
ATTACH TO POWER TERMINAL
Lionel no.
610-5906-001
sound activa-
tion button
(for bell)
7
7