Installing The Lionel No. 610-5906-001 Sound Activation Button - Lionel 2343c Non-Powered F3 B Unit Owner's Manual

Transformer operations

Installing the Lionel no. 610-5906-001 sound activation button

T o operate the bell and horn sounds when
operating your F3 with conventional
transformers, you'll need to install the Lionel
Black wire
For AC transformers lacking a horn/whistle button (two no. 5906s required)
Red wire
Lionel no.
610-5906-001
sound
activation button
(for horn)
The no. 610-5906-001 sound activation button (available separately) works with
Note!
any Lionel AC transformer except no. 6-4690 Type MW. Transformers made by
other manufacturers may not be compatible with RailSounds.
1 2
Existing wire
to your transformer
Red wire
Lionel no. 610-5906-001
sound activation button for
activating the bell
For AC transformers with a horn/whistle button
1 2
Black wire
no. 610-5906-001 sound activation button
(available separately). Connect the button(s)
as shown below.
attach to ground terminal
attach to power terminal
Note!
attach to ground terminal
of your transformer
Red wire
attach to power terminal
Lionel no.
610-5906-001
sound activation
button (for bell)
6
All track power must feed
through "Sound Activation
Button."
Do not bypass button.