Lubrication; Lubrication Schedule; General - Husqvarna Z3815BIA, Z3815BIA, Z4217BIA, Z4218KOA, Z4218KOA Operator's Manual

Lubrication

Lubrication Schedule

Lubrication schedule
12/12 Every year
Lubricate with grease gun
1/52 Every Week
1/365 Every day

General

Remove the ignition key to prevent unintentional movements during lubrication.
When lubricating with an oil can, it must be filled with engine oil.
When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulfide grease.
For daily use, the machine shall be lubricated twice weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this
happen, attempt to clean them with spirits. If the belt continues to slip after cleaning, it must be replaced.
Gasoline or other petroleum products must not be used to clean belts.
52
English-
LUBRICATION
Oil change
Filter change
8011-673
Lubricate with oil can
Level check