Process Section - Kyocera FS-720 Service Manual

2GL/2FV/2FW

1-6-4 Process section

(1) Detaching and refitting the developer unit and drum unit
When replacing the drum unit which was, for example, damaged due to scratches, perform the drum unit optimization pro-
cedure. See page 1-6-7.
<Procedure>
1. Open the top cover.
2. Remove the developer unit (with toner con-
tainer.
3. Remove the drum unit.
1-6-6
Top cover
Developer unit
Figure 1-6-7 Removing the developer unit
Drum unit
Figure 1-6-8 Removing the drum unit