2-1-5 Transfer section
The image developed by toner on the drum is transferred onto the paper because of the electrical attraction between the
toner itself and the transfer roller. The transfer roller is negatively biased so that the positively charged toner is attracted
onto the paper while it is pinched by the drum and the transfer roller.
Transfer roller
Figure 2-1-10 Transfer section
Transfer bias output
-2.3 kV/-9 µA
-2.6 kV/-12 µA
Transfer
roller
Switches output depending on
media type and media size.
Figure 2-1-11 Transfer section block diagram
Engine/high
voltage PWB
J1/J2/J3
2GL/2FV/2FW
2-1-9