Safety Instructions - Soundstream VR-652NB Owner's Manual

Safety Instructions
PLEASE READ COMPLETELY AND BECOME FAMILIAR WITH THE CONTENTS OF
THIS MANUAL BEFORE INSTALLATION AND OPERATION OF THIS UNIT. KEEP THIS
MANUAL FOR FUTURE REFERENCE.
This unit is a class 1 laser product. The laser beam may cause hazardous radiation if
exposed to laser system directly. Do not attempt to disassemble the unit personally.
This unit has been designed and manufactured to assure personal safety. Improper use
can result in electric shock or fire hazard.
A
Warnings
-Do not expose the product to rain, water or excessive moisture. This could cause
electrical shorts, fire or other damage.
-This product is designed to operate with a 12 volt DC, negative ground battery system.
Use the proper power supply.
-The monitor is operated automatically. Do not push in or pull out the monitor or try to
rewind
the monitor manually! Do not attempt to adjust the monitor angle upward or
downward manually. It will cause damage to the Monitor Mechanism Structure.
-Do not impact the monitor with a hard object. It may cause permanent damage.
-Do ground all equipments and works in order to avoid causing damage to the unit by
electrostatic discharges.
-The user who handles this product should take all necessary precautions to avoid ESD
(Electro-Static Discharge) failures.
-Do not attempt to install or service your unit by yourself. Installation or servicing of the unit
by persons without training and experience in electronic equipment and automotive
accessories may be dangerous and could expose you to the risk of electric shock or
other hazards.
Important Safeguards
<D
To reduce the risk of fire or electric shock, and annoying interference, use only the
recommended accessories.
<D
While driving, keep the volume level low enough to be aware road and traffic
conditions.
<D
Parking in direct sunlight can produce very high temperatures inside your vehicle. Give
the interior a chance to cool down before starting playback.
CD
Do not use any chemical solvent, cleaning agent or corrosive detergent to clean away
dirt on the surface of the TFT monitor screen. It may cause irreversible damage.
<D
Small black and shiny dots inside the liquid crystal panel should be considerd normal
for liquid crystal displays.
Q)
In extremely cold temperatures, the movement of the picture may be slow and the
picture may be dark, this is not a malfunction. The unit will work normally once reaching
proper operating temperatures.
<D
Do not use and store the unit in dusty, high temperature and high humidity environ-
ments.
41