Table of Contents
Advertisement
7 . I N S P E C T I O N A N D M A I N T E N A N C E
Attention
. When tread depth is below 0.5mm it can easily lead to power chair slippage, making braking
distances longer. Therefore replace the tyres as early as possible when they are found to have
insufficient tread depth.
. The tire pressure (rear tire) shall be kept at about 26 PSI (approx. 1.8 kg/
performance and handling.
Attention
Before doing any maintenance, turn the power switch to OFF and remove the charger cords.
Suggestions
1.Do not splash water onto the power chair as this could cause the electronic system to malfunction.
2.Do not use petrol, solvents or aerosols as these may deform or damage the shrouds.
3.Do not use wax.
STORAGE
Make sure the power chair is stored as follows:
-Make sure the charger is unplugging position.
-Make sure the power switch is turned to "OFF"
Suggestion
Store the power chair in a location where it is out of direct sunlight, rain with the charger unplugged or
dew, charge the battery to full power and then disconnect the battery terminal. For details inquire to
your dealer.
25
) for the best drive
㎠
Hide quick links:
Advertisement
Table of Contents
