Operation - Drive Medical Sunfire General Owner's Manual

JOYSTICK AND CONTROLLER
Your Sunfire General is operated by a joystick and controller. The Sunfire General is
currently available with a PG VR 2 controller.
VR2 Series CONTROL FUNCTIONS
1.ON/OFF Button
4. Maximum Speed / Profile Indicator
5.Speed / Profile Decrease Button
7. Speed / Profile Increase Button
HOW TO OPERATE YOUR SUNFIRE GENERAL
ON/OFF Button
The ON/OFF button applies power to the control system
electronics , which in turn supply power to the power chair's
motor. Do not use the ON/OFF button to stop the power chair
unless there is an emergency.
Attention:
If you use the ON/OFF button to stop the power chair, it may shorten the life of the
drive components
Battery Gauge
The battery gauge shows you that the power chair is switched on. It also indicates the operating status
of the power chair
Joystick
The primary function of the joystick controls the speed and direction of the power chair. The further
you push the joystick from the center position the faster the power chair will more. When you release
the joystick the brakes are automatically applies.
Maximum Speed / Profile Indicator
This gauge shows the maximum speed setting of the power chai r.
5 . O P E R AT I O N
2. Battery Gauge
2
4
3. Joystick
5
6.Horn Button
12
1
3
6
7