Disabling The Tv's Operation Of An Llink Device - Sharp Aquos LC-32D5U Operation Manual

Using external equipment
Press
A/"f /
~/~
to select" Model" , and then
press ENTER.
• Selection screen appears.
Press LLINK to display the i.LINK control
panel.
Press
"f
to select "Cancel Connection" and
then press ENTER.
• Operation of the i.L1NK device frorn the TV is
disabled.
• When there is no i.LINK device connected, ':No
i.LINK model is available" appears. Please connect
an i.LINK device. (See page 58.)
• When there is no i.LINK device selected, the
selection screen appears. Please go to step 3.
• Registered i.LINK devices can be deleted from a
list.
• If an i.LINK device is connected, it cannot be deleted
from the list.
• By disabling the TV's operation of an i.LINK device,
the device can be operated from another i.LINK device.
Press
£./"f
to select a device, and then press
ENTER.
• The control panel for the i.L1NK device appears.
Press
"/"f /
~/~
to select "Model", and
press ENTER.
• Selection screen appears.
• In order to control an i.LINK device from the TV, you
must first choose the i.LINK device to be controlled.
• One i.LINK device can be chosen from up to 16
i.LINK connected decks.
• All i.LINK devices connected with i.LINK cables
should automatically appear in the selection screen.
• When there is no i.LINK device connected, the
rnessage "No i.LINK model is available" appears. In
this case, please connect an i.LINK device. (See
page 58.)
• When there is no i.LINK device selected, the
selection screen appears. In this case, please go to
step 3.
Press LLINK to display the i.LINK control
panel.
@-60
• Devices that cannot be used with this TV will not appear
in the selection screen.
• Depending on the i.LINK devices connected, the
manufacture(s name and model name of some devices
may not display correctly.
• In the case where the manufacturer's and model names
are not correctly displayed, disconnect the i.L1NK cable.
Follow the procedure for "Deleting registered i.LINK
devices" and cancel all i.L1NK devices you have registered
before reconnecting the i.L1NK cable.
• When an item in the selection screen is grayed out. the
item is not recognized by the TV and cannot be selected.
(The item may not be connected properly.)
• The i.L1NK device selected above will be autornatically
set as a recording device in the TV Guide On Screen
system and may be used to record digital broadcasts.
Press
£./"f
to select a device to be deleted,
and then press ENTER.
Press
~
to select "Delete!:, and then press
ENTER.
• The selected i.L1NI< device is deleted from the
list.
• Select "Cancel" if you do not want to delete
any device.