Sharp Aquos LC-32D5U Operation Manual page 41

Basic adjustment settings
Antenna setting
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable" for ANALOG and DIGITAL
(Cable).
Press
~/~
to select "Air", "Cable", for
ANALOG, then press'" to move down.
Press
~/~
to select "Standard", "HRC",
"IRC" for DIGITAL (Cable).
Press ENTER to enter the setting.
• There are 3 kinds of CATV system, including
Standard, HRC and IRe. Select the one matches
to your TV.
• If cable or antenna connection was selected for
the ANALOG IN terminal at the time when you
set up TV Guide On Screen, the analog settings
cannot be changed afterward. If you need to
change the analog settings, you will have to
change the TV Guide On Screen settings first.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
RECORD
@o]IvC§§g
MENU
o~
__
1-'
Antenna setting
Press MENU and the MENU screen displays.
Press
~/~
to select "Setup".
• If no channel is found, make sure what kind of connection is
made with your TV and try EZ Setup again.
• Make sure what kind of connection is made with your TV.
Press
./T
to select "CH Setup';, and then
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 77 for
setting a secret number.
Press
.1...
to select "Air/Cable", and then
press ENTER.
Press ....
/~
to select "Air"
I
HCable", for
ANALOG, then press'" to move down.
Press
~/~
to select, "Standard", "HRC",
"IRC" for DIGITAL (Cable).
Press ENTER to enter the setting.
Example
• Make sure what kind of connection is made with your TV.
• There are 3 kinds of CATV system, including Standard,
HRC and IRC. Select the one matches to your TV.
Found [ 20]
Found [ 20]
Found [ 25]
•
•
Air [ 25]
Air [ 25]
Cable [ 25]
Searching TV channels
Example
DIGITAL
ANALOG
DIGITAL
Press
~/~
to select "Yes" for ANALOG, then
press'" to move down.
Press ....
/~
to select "Yes" for DIGITAL (Air),
then press'" to move down.
Press
~/~
to select "Yes" for DIGITAL
(Cable), and press'" to move down.
Select "Search Start", and then press
ENTER.
• This operation makes the TV search for both
ANALOG, DIGITAL (Air) and DIGITAL (Cable)
channels.
@-40