Selecting A D-Vhs Deck (I.link); Disabling The Tv's Operation Of A D-Vhs Deck (I.link) - Sharp Aquos LC 45GD4U Operation Manual

Using external equipment

Selecting a D-VHS deck (i.LINK)

• In order to control a D-VHS deck from the TV, you
must first choose the D-VHS deck to be controlled.
• One D-VHS deck can be chosen from up to 16 i.LINK
connected decks.
• All D-VHS decks connected with i.LINK cables
should automatically appear in the selection screen.
1
Press i.LINK to display the i.LINK control
panel.
1
0 0 : 0 0 : 0 0
STOP D-VHS
• When there is no D-VHS deck connected, the
message "No i.LINK model is available" appears. In
this case, please connect a D-VHS deck. (See page
57.)
• When there is no D-VHS deck selected, the selection
screen appears. In this case, please go to step 3.
2
Press a/b/c/d to select "Model", and
press ENTER.
• Selection screen appears.
Type
3
Press a/b to select a device, and then press
ENTER.
• The control panel for the D-VHS deck appears.
NOTE
• Devices that cannot be used with this TV will not appear
in the selection screen.
• When an item in the selection screen is grayed out, the
item is not recognized by the TV and cannot be selected.
(The item may not be connected properly.)
Model Input
PWR
PLAY
Manufacturer Model
Disabling the TV's operation of a D-VHS
deck (i.LINK)
• By disabling the TV's operation of a D-VHS deck,
the deck can be operated from another i.LINK
device.
1
Press i.LINK to display the i.LINK control
panel.
1
0 0 : 0 0 : 0 0
STOP
• When there is no D-VHS deck connected, "No i.LINK
model is available" appears. Please connect one.
(See page 57.)
• When there is no D-VHS deck selected, the selection
screen appears. Please go to step 3.
2
Press a/b/c/d to select "Model", and
press ENTER.
• Selection screen appears.
Type
3
Press b to select "Cancel Connection" and
press ENTER.
• Operation of the D-VHS deck from the TV is
disabled.
Type
Model Input
PWR
D-VHS PLAY
Manufacturer Model
Manufacturer Model
Cancel Connection
59