Antenna Setup - Digital - Air - Sharp Aquos LC-32D5U Operation Manual

Basic adjustment settings
In order to receive digital air broadcasts, you need a
digital broadcast antenna. You can confirm the antenna
configuration through the "Antenna Setup - DIGITAL"
screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
Press MENU and the MENU screen displays.
Press
~/~
to select "Setup".
Standby Mode may be set to either start the TV quickly
from standby or conserve energy while on standby.
Press MENU and the MENU screen displays.
Press
~/~
to select "Setup".
Press
./T
to select "Standby Mode", and
then press ENTER.
Press
./T
to select IlAntenna Setup -
DIGITAL", and then press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 77 for
setting a secret number.
Press
./T
to select "Signal Strength".
• The signal strength of the DIGITAL (Air) antenna
is displayed. The signal information is based
on the current channel.
Mode1
Mode2
Press
./T
to select "Mode 1" or "Mode2",
and then press ENTER.
Starting TV is quick from standby.
Power consumption is small at the
standby.
Channel Strength
• The channel signal strength can also be checked
separately.
<i"
r
Repeat steps 1 to 3 in Signal Strength in
Antenna Setup - DIGITAL - Air.
Press
./T
to select "Channel Strength", and
then press ENTER.
Input the 2-digit channel number to check
the signal strength of the selected channel.
• Make sure the appropriate signal strength of
each channel received is obtained.
@-42
• This function is available for DIGITAL (Air) only.