Using external equipment
Please use the INPUT 4 terminal when connecting HOMI equipment.
1 - - - - - + - - - - - - - - - 1 - - - - - - - - -
Select the signal amplitUde
range. Normally, select
Standard.
Select the internal color
space conversion method
when an ROB signal is
input. Normally, select
Auto.
Press ..
IT
to select the desired item and
press ENTER.
Press ..
IT I
~/~
to select the desired setting
and press ENTER.
Dynamic
Standard/
Range
Out of Standard
Signal
Auto/ROB/YCbCr
Select the signal type from
Type
4:4:4/YCbCr 4:2:2
an HDMI terminal. Unless
the image quality looks
obviously poor, select Auto.
Color
Auto/ITU60
1/
Matrix
ITU709
To watch an HOMI equipment image, select
"INPUT4" from "INPUT SOURCE" menu
using INPUT on the remote control unit or
on the TV. (See page 66.)
• Refer to your external equipment operation manual for
the signal type.
Press MENU and the MENU screen displays.
Press
~/"
to select "Option".
Press ..
IT
to select llHOMI Setup", and then
press ENTER.
Auto View Enable/Disable
Set whether or not to use
VI EW MODE based on
signal recognition,
including an HDMI signal.
@-56