Sharp Aquos LC-32D5U Operation Manual page 71

Useful adjustment settings
• SOITle input signals may have to be registered manually
Produces a clearer video image.
to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
Press MENU and the MENU screen displays.
have to set the correct signal manually. After setting once,
it will display when the sarne signal (resolution) is input
again.
640x400 720x400
640x480 848 x480
1024 x 768 1280x768
• You can only select the l:lnput Signal" on the Setup menu
when receiving one of the 6 input signals listed above.
RECORD
@Eo EY
~
MENU
0 _
I I
EO
_._RORN
- FAVORITE CH -
~+
Press
~/~
to select "Option".
Press
./"f
to select llOigital Noise
Reduction", and then press ENTER.
Press
./T
to select the desired level, and
then press ENTER.
Press MENU and the MENU screen displays.
Press
~/~
to select "Setup".
When listening to music from a music program, you
can set the Liquid Crystal display off and enjoy audio
only.
@-70
Press
.roy
to select 'llnput Signal" and then
press ENTER.
Press
./"f
to select the desired input signal
on the display.
Example
Off
Repeat steps 1 and 2 in Digital Noise
Reduction.
Press
j./T
to select "Aud io Only", and then
press ENTER.
Press
~/~
to select "OnJl
J
and then press
ENTER.
Both screen images and audio are output.