Fax Settings - Canon ImageClass MF 4270 Operation Manual

FAX SETTINGS

Setting Item
1. RX MODE
2. USER SETTINGS
1. UNIT TELEPHONE #
2. UNIT NAME
3. TX TERMINAL ID
ON
OFF
4. TEL LINE TYPE
5. STANDARD SETTINGS
1. DENSITY
2. IMAGE QUALITY
12-10
Selects the receive mode. (See "Set the Machine for Receiving
Faxes," in the Starter Guide.)
FaxOnly
–
– AnsMode
– NET SWITCH
– FaxTel
– MANUAL
Specifies the basic operation settings in the fax mode.
Registers your fax number (max. 20 characters, including
spaces). (See "Set the Machine for Sending Faxes," in the Starter
Guide.)
Registers your name/company name (max. 32 characters,
including spaces). (See "Set the Machine for Sending Faxes," in
the Starter Guide.)
Sets the options for sender information.
Sender information is printed in small type at the top of each
page.
Sender information is not printed.
Selects the telephone line type. (See "Before FAX Setting," in the
Starter Guide.)
TOUCH TONE
–
– ROTARY PULSE
Sets the default setting for faxing.
Sets the default density for faxing (1–9 (5)).
Sets the default image quality for faxing.
– STANDARD
– FINE
– PHOTO
– SUPER FINE
Description