Snmp > Snmp > Snmp Group - D-Link Web Smart Switch DGS-1210-16 Reference Manual

Configuration
User Name: Enter a SNMP user name of up to 32 characters.
Group Name: Specify the SNMP group of the SNMP user.
SNMP Version: Specify the SNMP version of the user. Only SNMPv3 encrypts the messages.
Encrypt: Specifies the Encrypt is enabled or disabled when the SNMP Version is V3.
Auth-Protocol/Password: Specify either MD5 or SHA to be the authentication protocol. Enter a password
for SNMPv3 encryption in the right column.
Privacy Protocol/Password: Specify either none or DES and then enter a password for SNMPv3
encryption in the right column.
Click Add to create a new SNMP user account. Click Delete to remove the corresponding entry.
SNMP > SNMP > SNMP Group
This window is used to maintain the SNMP Group Table associating to the users in SNMP User Table.
SNMPv3 can control MIB access policy, security policy for a user group directly.
Group Name: Specify the SNMP user group of up to 32 characters.
Read View Name: Specify a SNMP view name for users that are allowed SNMP read privileges to the
Switch's SNMP agent.
Write View Name: Specify a SNMP view name for users that are allowed SNMP write privileges to the
Switch's SNMP agent.
Security Model: Select the SNMP security model.
v1 – SNMPv1 does not support the security features.
Figure 4.97 – SNMP > SNMP > SNMP User Table
Figure 4.98 – SNMP > SNMP > SNMP Group
8 3
8 3
D-Link Web Smart Switch User Manual