Dgs-1210-16; Front Panel; Rear Panel; Dgs-1210-24 - D-Link Web Smart Switch DGS-1210-16 Reference Manual

Product Introduction

DGS-1210-16

16-Port 10/100/1000Mbps plus 4 SFP Slot Web Smart Switch.

Front Panel

Power LED : The Power LED lights up when the Switch is connected to a power source.
Port Link/Act/Speed LED (1-20): The Link/Act/Speed LED flashes, which indicates a network link through
the corresponding port. Blinking indicates that the Switch is either sending or receiving data to the port.
When a port has an amber light, this indicates that the port is running on 10M or 100M. When it has a green
light it is running on 1000M.
Reset: By pressing the Reset button for 5 seconds, the Switch will change back to the default configuration
and all changes will be lost.

Rear Panel

Power: The power port is where to connect the AC power cord.
Security Lock: Provide a Kensington-compatible security lock to be able to connect to a secure immovable
device. Insert the lock into the notch and turn the key to secure the lock. The lock-and-cable apparatus
should be purchased separately.

DGS-1210-24

24-Port 10/100/1000Mbps plus 4 SFP Slot Web Smart Switch.
Front Panel
Power LED : The Power LED lights up when the Switch is connected to a power source.
Figure 1.1 – DGS-1210-16 Front Panel
CAUTION: The Mini-GBIC ports should use UL recognized Optical
Transceiver product, Rated Laser Class I. 3.3Vdc.
Figure 1.2 – DGS-1210-16 Rear Panel
Figure 1.3 – DGS-1210-24 Front Panel
D-Link Web Smart Switch User Manual
SWITCH GND
AC LINE
100-240 VAC
50-60 Hz
0.5A MAX
5
5
Power Cord Clip