User Preferences; Default Parameters - Symbol LS4278 Product Reference Manual

User Preferences

Default Parameters

The scanner can be reset to two types of defaults: factory defaults or custom defaults. Scan the appropriate bar code below to reset
the scanner to its default settings and/or set the scanner's current settings as the custom default.
• Restore Defaults - Resets all default parameters as follows:
• If custom default values were configured (see Write to Custom Defaults), the custom default values are set for all
parameters each time the Restore Defaults bar code below is scanned.
• If no custom default values were configured, the factory default values are set for all parameters each time the Restore
Defaults bar code below is scanned. (For factory default values, see
• Set Factory Defaults - Scan the Set Factory Defaults bar code below to eliminate all custom default values and set the
scanner to factory default values. (For factory default values, see
• Write to Custom Defaults - Custom default parameters can be configured to set unique default values for all parameters.
After changing all parameters to the desired default values, scan the Write to Custom Defaults bar code below to
configure custom defaults.
*
Restore Defaults
Write to Custom Defaults
Table A-1 beginning on
Table A-1 beginning on page A-1.)
Set Factory Defaults

User Preferences 5-5

page A-1.)