Code 11; Set Lengths For Code 11 - Symbol LS4278 Product Reference Manual

Code 11

Code 11
To enable or disable Code 11, scan the appropriate bar code below.
Enable Code 11

Set Lengths for Code 11

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within a specific range.
• One Discrete Length - Select this option to decode only Code 11 symbols containing a selected length. Select the length
using the numeric bar codes in
characters, scan Code 11 - One Discrete Length, then scan 1 followed by 4. To correct an error or to change the
selection, scan Cancel on page
• Two Discrete Lengths - Select this option to decode only Code 11 symbols containing either of two selected lengths.
Select lengths using the numeric bar codes in
symbols containing either 2 or 14 characters, select Code 11 - Two Discrete Lengths, then scan 0, 2, 1, and then 4.
To correct an error or to change the selection, scan Cancel on page D-4.
• Length Within Range - Select this option to decode a Code 11 symbol with a specific length range. Select lengths
using numeric bar codes in
between 4 and 12 characters, first scan Code 11 - Length Within Range. Then scan 0, 4, 1, and 2 (single digit numbers
must always be preceded by a leading zero). To correct an error or change the selection, scan Cancel on page D-4.
• Any Length - Scan this option to decode Code 11 symbols containing any number of characters within the scanner
capability.
Appendix D, Numeric Bar Codes. For example, to decode only Code 11 symbols with 14
D-4.
Appendix D, Numeric Bar
Appendix D, Numeric Bar Codes.
*
Disable Code 11
Codes. For example, to decode only those Code 11
For example, to decode Code 11 symbols containing
Symbologies 13-31