Radio Communications 4-11
HID Ignore Unknown Characters
Unknown characters are characters the host does not recognize. When Send Bar Codes With Unknown Characters is scanned,
all bar code data is sent except for unknown characters, and no error beeps sound. When Do Not Send Bar Codes With Unknown
Characters is scanned, bar codes containing at least one unknown character are not sent to the host, and an error beep sounds.
*
Send Bar Codes With Unknown Characters
(Enable)
Do Not Send Bar Codes With Unknown Characters
(Disable)
Emulate Keypad
When enabled, all characters are sent as ASCII sequences over the numeric keypad. For example, ASCII A is sent as "ALT make" 0 6
5 "ALT Break."
*
Disable Keypad Emulation
Enable Keypad Emulation